Close

User Tag List

Page 1 of 36 1234511 ... LastLast
Results 1 to 20 of 701
  1. #1
    punkboySL2's Avatar
    Join Date
    Jan 2006
    Location
    AUSTIN, TX
    Posts
    8,625
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    94 SC2 - turbo project: big turbo update

    (1994) (Saturn) (SC2) -----------------------------------------------

    Start Goal: Get it up and running at ~7 PSI
    End Goal: Run 12's, break 350whp and beat down STI's

    Start Date: Spring 2008
    Planned End Date: ?

    Picked this thing up for $500 off my buddy. Right now it has a loud knock in the motor, which is still unknown. Overall shape is pretty good, not too much rust. Has a pacesetter exhaust and an intake and some gay aftermarket 15" wheels which will be replaced by stock 94 teardrops. This car will stay stock on the outside except for maybe some clear side markers. It's going to be a total sleeper. I already have some H&R springs on KYB's sitting in my garage waiting to be put on. If it gets warm enough in a few weeks i'll pull a motor from the JY just to put in and get it running.

    Exterior: Stock with 95-96 front bumper, lowered ~1"

    Interior: stock with some gauges and 96SL2 seats, partially gutted, battery in trunk

    Engine: 2.2l LLO (89mm stroke and bore)
    Golden Eagle block (baller)
    8.7 to 1 CP pistons
    Crower rods
    new crank
    acl custom bearings
    SDA race port job
    ian turbo cams
    full ferrea valvetrain w/ over sized valves
    ian intake manifold
    fidanza flywheel
    act clutch 6 puck
    adjustable cam gears
    titan head gasket
    arp head bolts
    2000+ lower girdle
    new oil pump,pick up tube
    new timing chain and guides and tensioner
    new timing chain cover
    new lifters
    new oil pan
    balanced to 12,000 rpm (this isn't a streetbike?)

    Full PimpedSC2 engine mounts (V1 TAM, V2 Dogbones)

    Suspension: Progress springs on KYB's.
    Full poly bushings
    SPS 17.5mm 4 way adjustable rear sway bar
    Stock 94 Teardrops w/ Azenis's or similar tires
    Stock 15" steelies for drag radials.
    Last edited by punkboySL2; 04-08-2012 at 02:24 PM. Reason: title
    98 SL2m - Intake, Raceland coilovers, daily driver
    94 SW2a>m - slammed and boosted 9 PSI - sloppymechanics.com inspired. Now owned by Importsdontlikeme.
    94 SC2m - Build in progress, Ford EDIS, 720cc's, stock engine, MS2v3.57 7 on the road again

  2. #2
    punkboySL2's Avatar
    Join Date
    Jan 2006
    Location
    AUSTIN, TX
    Posts
    8,625
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    well, plans have changed. I'm going turbo instead of S/C. I got a kit for a great deal and couldn't pass it up. i started tearing into the car last week. got the AC system cleaned out as well as some of the other various crap from the engine bay i won't be needing. Also cut open the front bumper for some better air flow.

    I should have a turbo kit for the car in about two weeks and should have the car running but not boosted in hopefully three weeks. I still need to go out and find a block. New plan is to go with a forged bottom end right off the bat. Might as well do it right the first time. I'll be running a stock head till i can grab a new one to do a full port job on and pick up some of Ian's chopstix.

    List of parts for the kit that i'm buying off of koolash_45 and a pic of the kit from turbosc2


    t3/t4 .57 trim external wastegate *no shaft play*
    tial 38 mm wastgate
    split second additional injector controller (up to 4 injectors)
    catch can w/lines and hollowed out pcv valve
    knockoff greddy type-rs blow off valve w/flange
    log style turbo manifold *5 bolt*
    Precision 350 HP core intercooler with mounts
    downpipe with dump
    SDA high flow cat
    drillled oil pan
    all intercooler piping *2 injector bungs welded in w/injectors*
    all oil feed/drain lines
    2 slim fams

    98 SL2m - Intake, Raceland coilovers, daily driver
    94 SW2a>m - slammed and boosted 9 PSI - sloppymechanics.com inspired. Now owned by Importsdontlikeme.
    94 SC2m - Build in progress, Ford EDIS, 720cc's, stock engine, MS2v3.57 7 on the road again

  3. #3

    Join Date
    Mar 2006
    Posts
    7,753
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    Awesome!

    Don't forget to take your time, do everything right. Good luck!

    A few things;
    1. Don't forget to save a little extra for a full exhaust. Open DP gets annoying after a while!
    2. Is your battery relocated already? If not, might as well get that out of the way and working before the kit gets there.
    3. Does the kit come with a vacuum block? They make things SO MUCH easier!
    4. Don't forget the misc little things. One thing I already see is the coolant line. I can only assume it wasn't sent with the kit, so make sure to grab an adjustable one.
    - Justin 99 Blue SL2 - T3/T4 14psi


    FS: Pimped lower trans mount, TiAL 38mm Wastegate, Gauge Cluster, Oil Drain

  4. #4

    Join Date
    Aug 2007
    Posts
    4,382
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    DO NOT melt your pistons, remember 12:1 ! [img]{SMILIES_PATH}/biggrin.gif[/img]
    2000 SL2 5 speed, boosted, meth injected, parted out...268whp & 254wtq (stock pump maxed out)..

  5. #5
    punkboySL2's Avatar
    Join Date
    Jan 2006
    Location
    AUSTIN, TX
    Posts
    8,625
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    thanks guys for the advice. I have already pulled out the battery, now just have to move it to the trunk. It does look like i'll have to move the coolant line, no biggy. It does not come with a vaccum block so far that i'm aware so i'll have to pick one up. Also the car has a pacesetter exhaust now so that will do for a while. I may cut it off before the axle and just do a turn down tip

    Also on the list to buy:
    ACT 6 puck
    Forged rods/pistons
    034 IEC
    ARP head bolts
    Copper head gasket
    few misc guages

    really that's all i need, lol.
    98 SL2m - Intake, Raceland coilovers, daily driver
    94 SW2a>m - slammed and boosted 9 PSI - sloppymechanics.com inspired. Now owned by Importsdontlikeme.
    94 SC2m - Build in progress, Ford EDIS, 720cc's, stock engine, MS2v3.57 7 on the road again

  6. #6

    Join Date
    Mar 2006
    Posts
    7,753
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    Quote Originally Posted by punkboySL2
    thanks guys for the advice. I have already pulled out the battery, now just have to move it to the trunk. It does look like i'll have to move the coolant line, no biggy. It does not come with a vaccum block so far that i'm aware so i'll have to pick one up. Also the car has a pacesetter exhaust now so that will do for a while. I may cut it off before the axle and just do a turn down tip

    Also on the list to buy:
    ACT 6 puck
    Forged rods/pistons
    034 IEC
    ARP head bolts
    Copper head gasket
    few misc guages

    really that's all i need, lol.
    Ehhh, either run the pacesetter exhaust all the way or not at all. Under car dump is lame (unless you put a muffler before the dump). Side exit might not be terrible, but iirc pacesetter is like 2.25" isn't it?
    - Justin 99 Blue SL2 - T3/T4 14psi


    FS: Pimped lower trans mount, TiAL 38mm Wastegate, Gauge Cluster, Oil Drain

  7. #7
    punkboySL2's Avatar
    Join Date
    Jan 2006
    Location
    AUSTIN, TX
    Posts
    8,625
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    Quote Originally Posted by d3ad1ysp0rk
    Quote Originally Posted by punkboySL2
    thanks guys for the advice. I have already pulled out the battery, now just have to move it to the trunk. It does look like i'll have to move the coolant line, no biggy. It does not come with a vaccum block so far that i'm aware so i'll have to pick one up. Also the car has a pacesetter exhaust now so that will do for a while. I may cut it off before the axle and just do a turn down tip

    Also on the list to buy:
    ACT 6 puck
    Forged rods/pistons
    034 IEC
    ARP head bolts
    Copper head gasket
    few misc guages

    really that's all i need, lol.
    Ehhh, either run the pacesetter exhaust all the way or not at all. Under car dump is lame (unless you put a muffler before the dump). Side exit might not be terrible, but iirc pacesetter is like 2.25" isn't it?

    That's correct. There is a resonator in there, so it wouldn't be just straight pipe. I'd probably chop it out and put something better in there though like a 24" glass pack. I don't know though, i think i'd rather just save up for a full 3" turbo back than put money into the current set up. I want to chop it off since i heard the mufflers flow like crap. I figure a little less restriction couldn't be too bad.
    98 SL2m - Intake, Raceland coilovers, daily driver
    94 SW2a>m - slammed and boosted 9 PSI - sloppymechanics.com inspired. Now owned by Importsdontlikeme.
    94 SC2m - Build in progress, Ford EDIS, 720cc's, stock engine, MS2v3.57 7 on the road again

  8. #8

    Join Date
    Mar 2006
    Posts
    7,753
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    Yeah my full 3" came to about $400-500 (stainless cat & resonator, mild steel piping, and welding charges).
    - Justin 99 Blue SL2 - T3/T4 14psi


    FS: Pimped lower trans mount, TiAL 38mm Wastegate, Gauge Cluster, Oil Drain

  9. #9
    punkboySL2's Avatar
    Join Date
    Jan 2006
    Location
    AUSTIN, TX
    Posts
    8,625
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    Quote Originally Posted by d3ad1ysp0rk
    Yeah my full 3" came to about $400-500 (stainless cat & resonator, mild steel piping, and welding charges).
    yeh, that's not too bad i suppose. Pretty much what i expected. I'll probably just stick to side exit when i get it up and running.
    98 SL2m - Intake, Raceland coilovers, daily driver
    94 SW2a>m - slammed and boosted 9 PSI - sloppymechanics.com inspired. Now owned by Importsdontlikeme.
    94 SC2m - Build in progress, Ford EDIS, 720cc's, stock engine, MS2v3.57 7 on the road again

  10. #10
    6S Staff redhotFTW!'s Avatar
    Join Date
    Sep 2007
    Location
    Palm Coast, FL
    Posts
    10,498
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    i dont think u r to far...depending on when i may be willing to mosey on down and help you out
    Black 2006 Cobalt SS/SC
    ZZP | GMPP |EBC |GM Stg2

  11. #11

    Join Date
    Mar 2006
    Posts
    7,753
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    Quote Originally Posted by sc2_projekt_97
    i dont think u r to far...depending on when i may be willing to mosey on down and help you out
    lol he's like 6 hours from you. Bought the same distance as he is from me.
    - Justin 99 Blue SL2 - T3/T4 14psi


    FS: Pimped lower trans mount, TiAL 38mm Wastegate, Gauge Cluster, Oil Drain

  12. #12

    Join Date
    Jul 2008
    Posts
    29
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    Good luck. Get it done soon!!

  13. #13

    Join Date
    Jul 2008
    Posts
    8
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    [quote="punkboySL2"](1994) (Saturn) (SC2) -----------------------------------------------


    this is what you need

    [attachment deleted by admin]

  14. #14
    punkboySL2's Avatar
    Join Date
    Jan 2006
    Location
    AUSTIN, TX
    Posts
    8,625
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    Quote Originally Posted by Fastwrx
    this is what you need
    no, what i need is for you to stop fucking posting in everyone's threads. I'm sure you'll be banned very shortly anyway.

    plus, that wouldn't fit my car anyway you tard.
    98 SL2m - Intake, Raceland coilovers, daily driver
    94 SW2a>m - slammed and boosted 9 PSI - sloppymechanics.com inspired. Now owned by Importsdontlikeme.
    94 SC2m - Build in progress, Ford EDIS, 720cc's, stock engine, MS2v3.57 7 on the road again

  15. #15

    Join Date
    Jul 2008
    Posts
    8
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    your trans will blow up if you even try to fuck with an sti......you have no idea the beatdown you will get! I do 0-60 in 4 sec flat and the 1/4 in 12.3, who's the tard now?? it is best you fuck with front wheel drive, an sti WILL bury you! [img]{SMILIES_PATH}/lame.gif[/img]

  16. #16

    Join Date
    Mar 2006
    Posts
    7,753
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    Quote Originally Posted by Fastwrx
    your trans will blow up if you even try to fuck with an sti......you have no idea the beatdown you will get! I do 0-60 in 4 sec flat and the 1/4 in 12.3, who's the tard now?? it is best you fuck with front wheel drive, an sti WILL bury you! [img]{SMILIES_PATH}/lame.gif[/img]
    1. You understand a Saturn making 200whp or more would wreck an STi from a roll, correct?

    2. Don't you drive a WRX anyways?

    3. When the fuck did he say anything about Subarus? If you're going to wave your wang around, do it over at Saturnfans where they don't know better.

    4. It's not selling cause it's a TWISTEC kit.

    5. GTFO.

    6. http://vids.myspace.com/index.cfm?fusea ... ID=1322712 - 1:08 vs a heavily modified STi.

    Suck it lameass.
    - Justin 99 Blue SL2 - T3/T4 14psi


    FS: Pimped lower trans mount, TiAL 38mm Wastegate, Gauge Cluster, Oil Drain

  17. #17
    6S Staff redhotFTW!'s Avatar
    Join Date
    Sep 2007
    Location
    Palm Coast, FL
    Posts
    10,498
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    whats with the flood of stupid people again lately?
    Black 2006 Cobalt SS/SC
    ZZP | GMPP |EBC |GM Stg2

  18. #18

    Join Date
    Aug 2007
    Posts
    57
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    Quote Originally Posted by Fastwrx
    your trans will blow up if you even try to fuck with an sti......you have no idea the beatdown you will get! I do 0-60 in 4 sec flat and the 1/4 in 12.3, who's the tard now?? it is best you fuck with front wheel drive, an sti WILL bury you! [img]{SMILIES_PATH}/lame.gif[/img]
    dont shit in ppls threads if you have problems take them elsewhere.....wrxs arent the fastest cars........and 12.3 isnt that fast for a rex........i know there are a few guys here that are faster....you will be banned

    /threadjack

  19. #19
    Pompous Asshole Kob's Avatar
    Join Date
    Jun 2004
    Location
    Barnesville, PA
    Posts
    12,514
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    Quote Originally Posted by d3ad1ysp0rk
    Quote Originally Posted by Fastwrx
    your trans will blow up if you even try to fuck with an sti......you have no idea the beatdown you will get! I do 0-60 in 4 sec flat and the 1/4 in 12.3, who's the tard now?? it is best you fuck with front wheel drive, an sti WILL bury you! [img]{SMILIES_PATH}/lame.gif[/img]
    1. You understand a Saturn making 200whp or more would wreck an STi from a roll, correct?

    2. Don't you drive a WRX anyways?

    3. When the fuck did he say anything about Subarus? If you're going to wave your wang around, do it over at Saturnfans where they don't know better.

    4. It's not selling cause it's a TWISTEC kit.

    5. GTFO.

    6. http://vids.myspace.com/index.cfm?fusea ... ID=1322712 - 1:08 vs a heavily modified STi.

    Suck it lameass.
    I've warned him already.

    --Adam
    2002 Subaru WRX - 2012 Yeti SB66 MTB

    http://www.facebook.com/adam.koback

  20. #20

    Join Date
    Mar 2006
    Posts
    7,753
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: 94 SC2 - Future turbo street terror

    Quote Originally Posted by adamkob32
    Quote Originally Posted by d3ad1ysp0rk
    Quote Originally Posted by Fastwrx
    your trans will blow up if you even try to fuck with an sti......you have no idea the beatdown you will get! I do 0-60 in 4 sec flat and the 1/4 in 12.3, who's the tard now?? it is best you fuck with front wheel drive, an sti WILL bury you! [img]{SMILIES_PATH}/lame.gif[/img]
    1. You understand a Saturn making 200whp or more would wreck an STi from a roll, correct?

    2. Don't you drive a WRX anyways?

    3. When the fuck did he say anything about Subarus? If you're going to wave your wang around, do it over at Saturnfans where they don't know better.

    4. It's not selling cause it's a TWISTEC kit.

    5. GTFO.

    6. http://vids.myspace.com/index.cfm?fusea ... ID=1322712 - 1:08 vs a heavily modified STi.

    Suck it lameass.
    I've warned him already.

    --Adam
    Cool, just wanted to make sure I got the point across with 6 neatly organized tid bits of information. lawl.
    - Justin 99 Blue SL2 - T3/T4 14psi


    FS: Pimped lower trans mount, TiAL 38mm Wastegate, Gauge Cluster, Oil Drain

Page 1 of 36 1234511 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •